nozzle valve
英 [ˈnɒzl vælv]
美 [ˈnɑːzl vælv]
喷嘴阀
双语例句
- Provide Marine Engine Parts, such as Plunger& Barrel, Nozzle, Delivery Valve, Bearing, Sealing Bush, Exhaust Valve, Inlet Valve, Valve Seat, etc.
提供各式船用柴油引擎零件，如柱塞、喷油嘴、输油阀、轴承、轴封、出气阀、进气阀等零件。 - The utility model relates to a sliding nozzle valve, which is a throttling device for pouring liquid metal.
一种滑动水口阀是注浇液体金属时用的节流装置。 - Principle and advantages of ultra-high speed injection molding realized by nozzle valve control were introduced.
对前端控制式超高速精密注射成型的工作原理以及技术优势进行了介绍。 - The newest progress in micro flow system is introduced, which includes new type of micro accelerometer, micro pump, micro nozzle, micro valve, micro channel and micro system.
设计出一种新型罐式沼渣车，该车主要由载重车体、储存罐、真空泵、压缩机、气水分离器、阀组、自动停止控制器以及传动装置等组成。 - Be involved in mixed components be selected and switched over through hydraulic drove the nozzle needle valve and pass system and PLC control.
参与混合组份的选择及切换由液压驱动的喷嘴针阀及其旁路系统实现以及PLC控制。 - Research on Static Flow Characteristics of Twin Flapper-nozzle Servo Valve
双喷嘴挡板电液伺服阀流量特性的研究 - The results show that the nozzle flapper valve has wide pressure control performance, good linearity, and high response speed. And theoretical basis is presented to further introduce the GMA nozzle flapper valve into electro-hydraulic servo valve.
结果表明，基于超磁致伸缩转换器喷嘴挡板阀，具有较宽的控制压力特性，良好的线性度，较快的响应速度，为进一步将其应用于两级电液伺服阀提供了设计和试验依据。 - Selection method of optimization parameter for hydraulic power mechanism operated by single nozzle flapper valve
单喷嘴挡板阀液压动力机构最佳参数的选择方法 - Taking DDC flow and direction valve as the tractive load, this paper investigates the selecting method of the optimization parameter for hydraulic power mechanism operated by single nozzle flapper valve, and puts forward the calculation formula and program of the optimization parameter.
本文以直接数字式流量阀和换向阀为拖动负载，对单喷嘴挡板阀液压动力机构最佳参数的选择方法进行了研究，提出了最佳参数的计算公式和计算程序。 - The structure and principle of the GMM actuator and the new nozzle flapper servo valve with GMA were presented. Its basic parameters were calculated and pressure-flow equation was established.
介绍了GMA喷嘴挡板阀的结构组成和工作原理，设计计算了GMA喷嘴挡板阀的基本参数，推导出了GMA喷嘴挡板阀的压力-流量特性方程。 - A new concept of the translation nozzle baffle valve was presented, its static properties and flow force were analyzed.
提出了平动式喷嘴挡板阀的概念，并对平动式喷嘴挡板阀的静态特性和液动力进行了分析。 - Two common methods of thermal deformation compensation of the GMM ( Giant Magnetostrictive Material) actuator, the compulsive cooling methods and the thermal compensation methods, were introduced. And the structure and work principle of the GMM actuator and the nozzle flapper valve were analyzed.
介绍了GMM（超磁致伸缩材料）转换器热变形抑制的常用两种方法：冷却和补偿方法，分析了GMM转换器及喷嘴挡板阀的结构组成和工作原理。 - Research on the Nozzle Flapper Servo Valve Driven by GMM Actuator
基于GMM转换器喷嘴挡板伺服阀的研究 - Control System Design for a New Type of Double Nozzle Flapper Valve
一种新型双喷嘴挡板阀控制系统设计 - Study on a Nozzle Flapper Gas Valve Based on Piezoelectric Stacks
一种基于压电堆驱动器的喷嘴挡板式气体控制阀的研究 - Control pressure characteristics of nozzle flapper valve based on GMA
基于超磁致伸缩转换器喷嘴挡板阀的控制压力特性 - In order to meet the more and more high reliability requirement, it is necessary to study the structure of injection nozzle and delivery valve in the locomotive model16V280ZJ diesel engine.
为了满足对可靠性越来越高的要求，非常有必要对机车用16V280ZJ柴油机的针阀偶件和出油阀偶件设计结构进行研究。 - The pump consists of swirl nozzle, valve cover, plug assemble and sand scratcher.
该泵采用了旋转接头、螺旋阀罩、柱塞总成、刮砂器于一体的多功能防砂结构，具有排而不卡和漏失量小的特点。 - Experimental study of the force characteristics of flapper-and-nozzle valve s
喷嘴-挡板式液压控制元件力特性的实验研究 - The Development of Special Machine Tool for Removing the Extra Material from the Nozzle Valve
针阀体去凸台专用机床的研制 - Piezoelectric type nozzle flapper valve and its control method
压电型喷嘴挡板阀及其控制方法研究 - A dynamic simulation model of start-up process including fuel pumped section and the dynamic nozzle valve lever, etc. is established for the torpedo thermal power system with pressure adjustment mode.
文中针对使用燃料压力调节供应方式的热动力系统，建立了包括充填集液腔和喷嘴阀杆运动等启动过程动态仿真模型； - Research on Characteristics and Design Parameters of Nozzle Flapper Servo Valve Based on GMM Actuator
GMA喷嘴挡板阀参数设计及特性研究 - Compared with the revolving nozzle baffle valve, the translation nozzle baffle valve has the same virtues as the revolving nozzle baffle valve, has better ability to resist pollution and can run steadily.
通过与旋转式喷嘴挡板阀的比较，指出该阀除了具有与旋转式喷嘴挡板阀一样的优点外，还具有抗污染能力强和稳定性好的优点。 - The effects of fuel spray distribution of injection nozzle, number of nozzle holes and opening pressure of nozzle needle valve on the performance of stratified combustion methanol engine were studied on a 1130 single cylinder diesel engine.
针对1130单缸柴油机研究了喷油嘴油线分布、喷油嘴孔数和喷油嘴针阀开启压力对分层燃烧甲醇发动机性能的影响。 - Study of the Principle of Ultra-high Speed Injection Molding Realized by Nozzle Valve Control
前端控制式新型超高速精密注射成型原理的研究 - An evaluation is made to synthetical gasoline detergent additives by laboratory simulation evaluation method and compared with foreign additives. It is shown that the detergent additives have good cleaning effect on both nozzle and intake valve.
用试验室模拟评定方法对合成的汽油清净剂进行了评定，并和国外清净剂进行了对比，结果表明此清净剂对喷嘴及进气阀皆有良好的清净作用。 - The Analysis and Research of the Translation Nozzle Baffle Valve
平动式喷嘴挡板阀的分析研究 - Parameters that influence droplet sizes from the nozzle include solenoid valve modulation rate, liquid pressure, air velocity discharged from the nozzle, and spray solution physical property.
影响雾滴粒径大小的可控参数主要有电磁阀占空比、喷雾压力、喷头出口风速和喷雾药液物理特性。 - The results showed: the stress near the bolt hole of cylinder head concentrate seriously because of the bolt preload effect; the stress near cylinder head fire surface nozzle and valve port is higher because of the high temperature and pressure influenced by the gas-fired.
分析结果表明，气缸盖螺栓孔由于螺栓预紧力影响，附近应力集中比较严重；受燃气高温高压影响较大的缸盖火力面喷油嘴和气阀口附近应力较高。